Furuno FM-4800 Operator's Manual page 30


ACCEPT: Select the soft key to continue with the call and switch to the
requested channel.

REJECT: Select the soft key to reject the call. After you select
"REJECT", the following screen appears. Select a reason for rejecting
the call, and then an "UNABLE ACK" message is sent. After the
message is sent, the radio returns to the home screen and the channel
remains unchanged.

PAUSE: Select the soft key to pause the call and timing and temporarily
disable automatic switching to the requested channel. You can resume
the call by pressing the "RESUME" soft key.
Select "ACCEPT".
Step 2

When CH70 is busy, you can wait without pressing any key until CH70
is idle.

When CH70 is idle, the radio sends an acknowledgement and the
requested channel is selected, ready for a conversation.
Note
If no key is pressed within 10 seconds, the radio automatically sends an
acknowledgement and switches to the requested channel when CH70 is idle.
Otherwise, the radio will wait until CH70 is idle.
Press and hold the PTT key to talk into the microphone.
Step 3
22