Back
AC type
Power LED
The LED turned on
when power is supplied.
V. PHASE
Used to adjust vertical
phase
Linelock mode from 0~270
Menu Setup Switch
Used to choose the desired menu
on or off, select the menu.
GND
Power ground.
Power Input Terminal
It involved power input.
Use only AC 24V, UL Listed
Class 2 Power Supply
(SDC-311PA)
(SDC-241PA)
High Voltage Type
10
COLOR CCD CAMERA
Video Output Jack
Used to connect an external
video monitor in jack.
DC Level
Used to adjust DC IRIS lens level.
(You can adjust DC level when
ESC mode is off.)
AC24V GND
(SDC-311NA/241NA)
DC type
Power LED
The LED turned on
when power is supplied.
Menu Setup Switch
Used to choose the desired menu
on or off, select the menu.
GND
Power ground.
Power Input Terminal
It involved power input.
Iris Lens Plug
NOTE
•The image has been set for optimum performance at the factory.
Do not remove the cover unless it is absolutely necessary.
It could cause damage to components and problems.
-Be sure to check the power is off when removing the cover.
Video Output Jack
Used to connect an external
video monitor in jack.
DC Level
Used to adjust DC IRIS lens level.
(You can adjust DC level when
ESC mode is off.)
Instruction Manual
11
COLOR CCD CAMERA