Back Light - Samsung SNP-3120 User Manual

Back Light

Backlight Mode Settings
Unlike other cameras, Samsung Techwin's unique A1 DSP chip gives you a clear image of
the subject even with bright backlight.
Main Menu Camera Setting
• Back Light
- OFF : Disables the Backlight mode.
- WDR : Activates the Wide Dynamic
Range mode.
- BLC : Activates a user defined backlight
compensation mode.
WDR
When there are both bright and dark areas at the same time, this mode makes both areas
distinctive.
Main Menu Camera Setting
• Limit : Three WDR sensitivity levels are
available in 3 : LOW, MEDIUM, and HIGH.
Note that the higher the sensitivity level,
the lower the contrast in the light and dark
areas becomes.
• Level : Adjusts the screen brightness in
WDR mode.

M
WDR is disabled when the VPS mode is
turned on.

WDR is disabled if the Iris is in Manual mode.

During WDR operation, noise, discoloration,
spots, and whitish symptoms may occur
depending on lighting conditions. If they occur,
stop using WDR.
Back Light
Camera Setting Camera Setting
Zoom/Focus Zoom/Focus
White Balance White Balance
Exposure Exposure
Back Light Back Light
AGC AGC
DNR DNR
XDR XDR
Day/Night Day/Night
Others Others
Back Light WDR
Camera Setting Camera Setting
Zoom/Focus Zoom/Focus
White Balance White Balance
Exposure Exposure
Back Light Back Light
AGC AGC
DNR DNR
XDR XDR
Day/Night Day/Night
Others Others
WDR Setting WDR Setting
Limit Limit
Level Level
ATW(IN) ATW(IN)
OFF OFF
--- ---
MEDIUM MEDIUM
OFF OFF
ATW(IN) ATW(IN)
WDR WDR
--- ---
MEDIUM MEDIUM
OFF OFF
MEDIUM MEDIUM
09 09
English _83