Troubleshooting - Samsung SDC-241 SERIES Instruction Manual

Troubleshooting

If you have trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact
an authorized technician.
Problem
• Check that the power cord and line connection
between the camera and monitor are made
properly.
Nothing appears on the
• Check that the DC/VIDEO selection switch on the
screen.
rear of the camera is set to a proper position
according to the type of your auto iris lens.
The image on the screen
Check that you have set ESC feature
•
is dark.
• Check if the lens are stained. If
The image on the screen
dirty, clean the lens with soft,
is dim.
clean cloth.
The camera is not work
• Check that you have connected the
properly, and the surface
camera to a proper power.
of the camera case is hot.
20 COLOR CCD CAMERA
Solution
Problem
The color of the picture is not
• Check that you have properly set White Balance
matched.
Control Mode.
• Adjust the contrast feature of the monitor.
The contrast on the screen
is too weak.
• If the camera is exposed under too strong light,
change the camera position.
• Does the camera face to directly to the sun or
fluorescent lighting?
Change the camera position.
The image on the screen
flickers.
• Check that the DC/VIDEO selection switch on
the rear of the camera set to a proper position
according to the type of your auto iris lens.
• Check that you have used 50Hz (PAL models),
The image on the screen is
60Hz(NTSC models) the linelock synchronization
mode cannot be used.
distorted.
Use the Synchronization Mode to INT mode.
Solution
COLOR CCD CAMERA 21