C - Installation; Doorplate Installation - Avidsen YLVA 2+ Manual

Colour video intercom, 2 wires - rfid feature
Hide thumbs Also See for YLVA 2+:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22

C - iNSTALLATiON

The recommended installation height for the intercom panel is about 160 cm from the ground and 150 cm
from the floor for the indoor unit.
WARNING: For obvious safety reasons, the connections must only be made after shutting off the power
supply.

1 - DOORpLATE INsTALLATION

The doorplate must not be directly exposed to bad weather. It should preferably be installed under a porch
or covered area.
Attach the doorplate hood to your support using the screws and wall plugs suited to the support (the screws
and plugs supplied are suitable for solid walls).
50mm
After making the connections on the doorplate (see the connections paragraph), put the doorplate into the
hood.
8
eN
Colour video interCom
50cm
70°
160cm
150cm
ø6 mm

Advertisement

Table of Contents
loading

Table of Contents