Panasonic CZ-RTC5B Operating Instructions Manual page 51

Internal Cleaning Function
„ Internal Cleaning Operation
When cooling or dry operation stopped, internal drying and nanoe™ X
circulation airflow is activated in order to suppress the mold
proliferation inside the unit (airflow passage, fan, heat exchanger).
According to the installation environment or operating hours, mold
proliferation or inhibition of mold growth will be changed.
Internal drying of inside unit
Fan rotation and internal dehumidifying
• Operating conditions and operating hours
Operates in cooling or dry mode for more than
5 minutes.
When finished, the internal cleaning operation is started.
Drives for about Max 75 minutes.
• The figure at right shows the display during the internal
cleaning operation.
• If you wish to resume operating during internal cleaning,
press .
„ To stop the internal cleaning operation
Press .
• When the internal cleaning operation finished and
stopped, the remote control display shows at right.
Note
z When connected to the remote controller, the internal cleaning function is set to
work automatically. If you wish to set to OFF, see page 52.
z In case that the operation time of the air conditioner is less than 5 minutes, the
internal cleaning operation cannot be performed.
z While the internal cleaning operation is running, the indoor temperature may
occasionally increase.
Fan rotation and nanoe™ X internal circulation
Internal Cleaning Operation
nanoe™ X cycle of inside unit
51
(EN)