Panasonic CZ-RTC5B Operating Instructions Manual page 46

Initial Settings
Mode
7
Select the item to set.
▲ ▼ →
8
Set and confirm.
▲ ▼ →
„ Human activity YES/NO
• Synchronizes the presence/absence
output of the motion sensor.
„ Indoor unit ON/OFF
• Synchronizes the operation/stop output
of the air conditioner.
„ Thermostat ON/OFF
• Synchronizes the thermostat ON/OFF
output of the air conditioner.
Duration of absence detection
(Duration of absence dtctn)
7
Select the item to set.
▲ ▼ →
8
Set and confirm.
▲ ▼ →
„ Duration of absence dtctn
• The operation-off timing can be changed.
The setting can be made between 0 and
60 minutes by the minute.
Note
z An administrator password is required to use external device interlock. (P.43)
z The external device interlock can be set using the separately sold ECONAVI
panel or by connecting the holder on the wall.
z When the [Ext dvice intrlok] is enabled, the mode setting and the absence
detection time setting are displayed.
46
(EN)
→
(Press 2 times to finish.)
→
(Press 2 times to finish.)
„ External device interlock (Continued)