Panasonic CZ-RTC5B Operating Instructions Manual page 28

Direct/Indirect airflow
5
When ECONAVI is off, select [YES].
◄ ► →
6
Select [Setting for all units] or
[Settings for individual units].
▲ ▼ →
7
Set.
„ Setting for all units
▲ ▼ →
• [Not set]: Operation is performed with
the set airflow direction without using the
"Direct airflow/Indirect airflow".
• [Direct airflow]: The unit swings wind up
and down around where the person is
present.
• [Indirect airflow]: The unit avoids hitting
wind at a person's body.
„ Settings for individual units
▲ ▼ → ► → ▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to finish.)
• If the airflow direction of the selected air
outlet is fixed, setting and changing are
not available.
Note
z [ECONAVI] can be set only with the separately sold ECONAVI panel or holder
on the wall, etc. or indoor units equipped with the "Direct airflow/Indirect airflow"
function.
z [Direct/Ind. airflow] can be set on the remote control for each flap of the indoor
unit.
(Only for the indoor units equipped with the [Direct/Ind. airflow] function
compatible with ECONAVI)
z In the following cases, each message appears and this function cannot be used.
• When the indoor unit is not
supported, or the motion
sensor is not equipped
28
(EN)
→
(Press 2 times to finish.)
• When the airflow
directions of the air outlets
are fixed
Not set
Direct
Indirect
• Locked or prohibited