ENGLISH
DVD Camcorder: Connection
Recording (Copying) a TV Program or Video Tape
onto a Disc (SC-DC565 only)
The Recording (Copying) function works only in Player Mode.
page 28
Connect your DVD Camcorder to a VCR or a TV using the AV/S jack to
record a TV program or copy a video tape to a disc. Set the AV In/Out
before Recording (Copying). page 86
Recording (Copying) onto a Disc
1. Get your TV or VCR ready.
2. Connect the DVD Camcorder
to your VCR or TV with Multi-
AV cable.
Connect the Multi-AV cable
to the output jack on your
VCR or TV
The yellow jack: Video
The white jack: Audio (L) –
Mono
The red jack: Audio (R)
3. Insert an empty disc in your
DVD Camcorder.
Please refer to page 13 for
selecting and formatting
discs.
To record from a VCR
4. Insert the tape to be played in your VCR.
Pause at the starting point of playing.
5. Start copying by pressing the [Start/Stop] button on your DVD Camcorder.
6. Press the PLAY button on your VCR to play the tape.
To record from a TV
4. Select a TV channel to be recorded.
5. Start recording by pressing the [Start/Stop] button on your DVD
Camcorder.
When Recording (Copying) is Complete:
Press the [(Stop)] button on your DVD Camcorder to stop
recording(copying).
90
DVD Caméscope: Raccordement
La fonction Enregistrement (copie) ne peut être activée qu'en Player
Reliez le DVD caméscope à un magnétoscope ou un téléviseur en
Enregistrement (Copie) vers un disque
TV
or
VCR
Signal flow
Multi-AV Cable
4. Insérez la cassette que vous voulez lire dans le magnétoscope.
5. Appuyez sur la touche [Start/Stop] de votre DVD caméscope pour
6. Appuyez sur la touche PLAY du magnétoscope pour lire la cassette.
4. Selectionnez la chaîne à partir de laquelle vous souhaitez enregistrer.
5. Appuyez sur la touche [Start/Stop] de votre DVD caméscope pour
Appuyez sur la touche [(Stop)] du DVD caméscope pour arrêter
l'enregistrement (la copie).
Enregistrement (Copie) d'un programme télévisé ou d'une
cassette vidéo sur un disque (modèles SC-DC565 uniquement)
Mode. page 28
utilisant le prise AV/S pour enregistrer un programme télévisé ou faire
la copie d'une cassette vidéo sur un disque. Réglez la prise AV In/Out
avant l'enregistrement (la copie). page 86
DVD Camcorder
Enregistrer depuis un magnétoscope
Suspendez la lecture au point de départ PAUSE.
lancer la copie.
Enregistrer depuis un téléviseur
lancer la copie.
Une fois l'enregistrement (la copie) terminé :
FRANÇAIS
1. Préparez le téléviseur ou le
magnétoscope.
2. Reliez le DVD caméscope au
magnétoscope ou téléviseur à
l'aide du câble Multi-AV.
Reliez le câble Multi-AV
à la prise de sortie du
magnétoscope ou du
téléviseur.
Prise jaune: vidéo;
Prise blanche: audio (G)
– mono
Prise rouge: audio (D)
3. Insérez un disque vierge dans
votre DVD caméscope.
Veuillez vous reporter à la
page 13 pour la séléction et
le formatage des disques.