Samsung SC-D6550 Owner's Instruction Book page 81

IEEE 1394 Data Transfer
System Requirements
I CPU: faster Intel ® Pentium III™ 450MHz compatible.
Operating system: Windows
I
I Main memory: more than 64 MB RAM
I IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV Connection Cable
1. Set the Power switch to PLAY.
2. Connect the DV cable (not supplied) from the DV jack of the Camcorder
to the DV jack of the other DV device.
I Make sure that
3. Press the Start/Stop button to begin REC PAUSE mode.
I PAUSE is displayed on the LCD screen.
4. Start playback on the other DV device while you monitor the picture.
5. Press the Start/Stop button to start recording.
I If you want to pause recording momentarily, press the Start/Stop button again.
6. To stop recording, press the I (STOP) button.
[ Notes ]
I When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
I Operation is not guaranteed for all the recommended computer environments mentioned above.
® 98SE, ME, XP, Mac OS (9.1~10.2)
is displayed on the LCD screen.
ENGLISH
77 77