Table of Contents
Advertisement
ENGLISH
Playback
Connecting to a TV which has no Audio and Video Input Jacks
✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Multi-AV cable.
I
The yellow jack: Video
I
The white jack: Audio(L) - Mono
I
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE.
5. Turn on both the TV and VCR.
I
Set the input selector on the VCR to
Line.
I
Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
Playback
✤ You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch
to PLAYER.
2. Set the Mode switch to TAPE.
3. Insert the tape you wish to play back.
4. Using the
/
(REW/FF) buttons, find the first
position you wish to play back.
5. Press the
(PLAY/STILL) button.
I
The images you recorded will appear on the TV after a few
seconds.
I
If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
I
The playback mode (SP/LP) is determined by the mode in which
the tape was recorded.
I
If the VCR has an S-Video input terminal, you may use S-Video
Connector for better quality.
I
The S-Video Connector transmits video only. Connect Audio cables
for sound.
I
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
✤
Video input-Yellow
S-Video input
Audio input(left)-White
Audio input(right)-Red
VCR
DV
USB
AV/
S
TV
Audio/Video/
S-Video
Antenna
I
I
I
I
I
I
Camcorder
I
I
I
I
I
✤
71
71
Advertisement
Table of Contents
