Table of Contents
Advertisement
ENGLISH
Playback
Audio Dubbing (SC-D465(B) only)
✤ The Audio Dubbing function works only in Player Mode.
✤ You cannot dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape
recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone (not supplied) or other audio
equipment.
✤ The original sound will not be erased.
Dubbing Sound
1. Set the Power switch to PLAYER.
I
If you want to use an external
microphone, connect the microphone to
the external MIC input jack on the
Camcorder.
2. Set the Mode switch to TAPE.
I
When you wish to dub using the
External A/V input, connect the Multi-AV
cable to the Multi-AV jack at the front
side of camcorder. (see to page 75)
3. Press the
(PLAY/STILL) button and find
the time frame of the scene to be dubbed.
4. Press the
(PLAY/STILL) button to
pause the scene.
5. Press the A.DUB button on the remote
control.
I
Audio dubbing (
) icon will be
displayed.
I
The Camcorder is ready for dubbing.
6. Press the
(PLAY/STILL) button to start dubbing.
7. Press the
(STOP) button to stop the dubbing.
[ Notes ]
I
You cannot use the Audio dubbing function while playing a write
protected video tape.
I
To utilize an external MIC or sound source, connect a microphone to
the MIC jack or use the Multi-AV cable to connect to external sound
source input.
I
To dub an external sound source, set the AV In/Out function to AV In.
(see page 75)
76
76
✤
✤
✤
SP
✤
✤
1
3 4
5
I
I
I
(
SC-D465(B))
Audio Dubbing
LP
16bit
1.
I
2.
I
-AV
3.
PLAY/STILL
4.
PLAY/STILL
5.
A.DUB
I
I
6.
PLAY/STILL
7.
STOP
AV In/Out AV
75
12
PLAYER
TAPE
A/V
75
/
/
/
AV
/
In
Advertisement
Table of Contents
