Makita DSD180 Instruction Manual page 8

1
1. Bolts 2. Blade holder 3. Blade
3.
that the curved edge of the blade points forward. Fit the
protrusion of the blade holder into the slot on the blade.
1. Slot 2.
4.
5.
Installing snap-off blade
CAUTION:
Always use the snap-off blade with
designated length, width, and thickness.
segments of 18 mm wide snap-off blade with 0.5 mm
when cutting a drywall.
10 mm
18 mm
1.
1
2
1
1.
blade holder so that its protrusion faces outward.
2. Insert the snap-off blade so that the sharp edge
faces forward.
3. Secure the snap-off blade at the position where
2
holder as illustrated.
3
1
1. Blade holder 2.
off blade 3.
Attaching blade cap
CAUTION:
tool is not used.
catches the base cover. Note the direction of the blade
cap when attaching; the wider hook comes front side.
When removing the blade cap, lift it while pinching the
both sides.
-
1. Blade cap 2. Hook
During operation, insert the blade cap to the hook on
the base as illustrated until it clicks.
8 ENGLISH
2
3
Always attach the blade cap when
1
2