Adjusting Depth Of Cut - Makita DSD180 Instruction Manual

battery.
Battery indicator status
On
Indicating the remaining battery
capacity
Only for battery cartridges with "B" at the end of the
model number
1. Indicator lamps 2. Check button
light up for few seconds.
Indicator lamps
Lighted Off
Remaining battery
capacity
Off
50% or more
20% - 50%
Less than 20%
1
2
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Switch action
1. Switch trigger
CAUTION:
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
button from the side with
the button from the side with
1
-
1. Lock-off button
CAUTION:
carrying or suspending the operation.

Adjusting depth of cut

blade. Loosen the screw on the blade holder until the
screws.
6 ENGLISH
Before installing the battery car-
marking.
Always lock the tool off when
1