Led Light - Makita DSD180 Instruction Manual

1. Cutting depth 2. Bottom line of the blade holder
3. Scale on the blade
cutting the working material.
Type of saw blade
For drywall
For wood

LED light

CAUTION:
Do not look in the light or see the
source of light directly.
keeps on lighting while the switch trigger is being pulled.
releasing the trigger.
1
1. Lamp
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
1
2
3
Max. cutting depth
30 mm
15 mm
7 ENGLISH
Removing the dust collector
CAUTION:
Never operate the tool without the
dust collector. Dust may come into your eyes and
pull back the tabs on the tool. Be sure to pull the tabs on
the both sides at the same time.
1.
When installing, align the dust collector's edge with the
groove on the base.
1. Groove
Replacing drywall saw blade
CAUTION:
Always clean out all chips or for-
eign matter adhering to the blade and/or blade
holder.
ening of the blade, resulting in a serious personal
CAUTION:
Do not touch the blade or the
workpiece immediately after operation.
be extremely hot and could burn your skin.
CAUTION:
Make sure that the blade is prop-
erly secured.
1. Remove the dust collector.
2. Remove the bolts on the blade holder with the hex
wrench.
1
1
-