FLIR Quasar Gen III Quick Install Manual

A. Connect the Camera
1. Insert a cable in the RJ45 connector to attach to
the network switch for a 10/100 Mbps Ethernet and
POE connection.
2. If not using PoE, use a properly rated
12VDC/24VAC power supply.
B. Discover the Camera
The camera's web interface can be accessed by
Internet Explorer 10 and higher (32-bit) with the ActiveX
plug-in and by browsers that do not require ActiveX,
such as Microsoft Edge, Chrome or Firefox, on PCs
running 64-bit Windows 7, 8, 8.1, or 10.
B.1. Configuring the camera on your workstation
for the first time
1. Install the CD in the product package or download
FLIR's Discovery Network Assistant (DNA) utility from
the Support > FLIR Firmware & Software Downloads
page at http://www.flir.com/security.
2. Click the DNA icon and run DNA version 2.1.2.21
or higher to log into the unit. Contact FLIR Support to
obtain this version.
3. Attach the unit to the same LAN segment as the
computer that is managing the unit. DNA automatically
discovers the unit on the network and displays the
device's current IP address in the Discover List.
4. Select the unit from the Discover List.
5. Select PAL or NTSC by selecting the unit and clicking
Change Video Format from the context menu, or from
the Properties > Device Properties screen.
6. Click Update
.
7 . If you are using ActiveX, but do not have the Microsoft
Visual C++ 2008 Redistributable libraries installed on
your PC, an error message is displayed. In this case,
download and install the
vcredist_x86.exe
the installation CD or from FLIR Support.
Quick Install Guide
B.2.a Managing the camera with Horizon, Meridian or on
a DHCP-enabled network
If the camera is managed by Horizon configured as a DHCP
server, or is on a network with a DHCP server, the camera
automatically receives an IP address
1. Open DNA. The unit is automatically discovered on the network.
See section B.1 for instructions how to install DNA.
2. Verify that the unit is displayed in the Discover List. The unit
status should be displayed as Online and Authenticated.
B.2.b Managing the camera with Latitude or on a network
with static IP configuration
If the camera is managed by Latitude or is on a network without
a DHCP server, you must manually enter its IP address in
DNA.
1. Open DNA. The unit is automatically discovered on the network.
See section B.1 for instructions how to install DNA.
2. If you use non-default credentials, the unit might become
unauthenticated. In this case, authenticate the unit:
a. Use DNA to select the unit(s).
b. Right-click or click the Login button.
c. Enter the camera's User Name ("admin") and Password
("admin").
d. Click Login.
3. In the DNA Assign IP screen, uncheck Use DHCP, and enter the
unit's IP, Mask and Gateway IP addresses. If the camera is not
authenticated, you must first authenticate it.
file from
.
4. Click Update.
B.3. Log into the Unit
1. Click the unit in DNA's Discover List. The Login window
opens.
2. Enter the default User Name ("admin") and Password
("admin"), which are case-sensitive. Then click OK.
3. Click OK. The unit's web interface opens.
4. If you are using IE and do not have the Microsoft Visual C++
2008 Redistributable package installed on your PC, install it
now.
5. Click the message to install the ArielPlayer plug-in.
6. Follow the on-screen instructions to install the plug-in.
Quasar Gen III
CF-6308
Fixed Box IP Camera