Power/Ac Adapter - Yamaha YV-600E Owner's Manual

PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions
include, but are not limited to, the following:
Do Not Disassemble
• Do not dismantle or modify the vibraphone's controller or
driver. Doing so can cause fire or electrical shock.
• Repairs or part replacement should not be attempted unless
instructions are provided in the manual.
Handling
• If you experience any abnormal movement, noise, or vibra-
tion, stop using the instrument immediately and tighten all
bolts again. The instrument can overturn resulting in injury.
• Never place your hands or feet underneath the pedal. Doing
so can result in pinched hands or feet.
• Never touch the rotating fans. Doing so can result in pinched
fingers, etc.
• Do not use or store the instrument in any of the following
locations. Doing so can cause fire or electrical shock.
- In places subject to high temperatures (near a heating
device or in direct sunlight, etc.).
- In places where the instrument may be exposed to
moisture (bathroom, on wet floors, etc.) and excessive
humidity.
- In places where the instrument may be exposed to rain.
- In places with excessive dust.
- In places subject to vibrations.
• Do not play or roughhouse around the instrument. Bumping
into the instrument can cause injury. It can also cause the
instrument to overturn. Do not allow children to play around
the instrument.
• Do not lean against or climb onto the instrument. Doing so
can cause the instrument to overturn resulting in serious
injury.
12
PRECAUTIONS
• When using the AC adapter, do not excessively bend the
• Never put foreign objects (combustible objects, coins, wire,
• If one of the following occurs, turn off the power, unplug the
• Always assemble the instrument with two or more persons.
• Follow and obey the instructions to properly assemble the in-
• Lock the caster brakes when the instrument is not in use.
• Never place the instrument on a sloping or unstable surface
• When moving the instrument on its casters, only move
• Never run with the instrument. The instrument may become
• If the instrument must be lifted or carried, do so with two or

Power/AC adapter

power cord, or place heavy objects on the cord. Doing so
may damage the cord causing fire or electrical shock.
etc.) or liquids (water, juice, etc.) in the drive unit. Doing so
can cause fire and electric shock.
AC adapter and request repair as soon as possible.
- If the AC adapter or power cord becomes damaged.
- If foreign objects or liquids have gotten into the drive unit.
- If the drive unit gets wet (rain, etc.).
- If the drive unit operates abnormally or is broken.
Transporting/Installation Location
Doing so alone can cause the instrument falling over result-
ing in injury and damage to the instrument.
strument. Using in an improperly assembled state can cause
the instrument to overturn, resulting in injury.
The instrument may move or overturn, resulting in injury.
or platform, etc. Doing so can cause the instrument to fall
over resulting in injury.
across smooth, flat surfaces. Avoid moving the instrument
on surfaces that are sloped or uneven. The instrument can
overturn, run out of control, and be a danger.
impossible to control and crash into a wall causing serious
injury.
more persons using both hands to lift it by the side frames.