Table of Contents
Advertisement
Checking the PCS setting information
Installer can see current PCS settings as below.
A
B
NOTE
y Viewable information names are listed below -
Grid Normal Voltage, Grid Normal Frequency, Grid Over/Under Voltage, Grid Over/Under Frequency,
Grid Over Current, DCLINK Over Voltage, Battery Over/Under Voltage, Battery Over Current,
PV1 Over/Under Voltage, PV1 Over Current, PV2 Over/Under Voltage, PV2 Over Current,
Heat-sink Over Temperature, PV Insulation Resistance, Operating Grid Maximum/Minimum Voltage,
Relay on Grid Voltage, Operating Grid Maximum/Minimum Frequency, Operating BAT Maximum/Minimum
Voltage, Residual Maximum/Minimum Current, RESTART TIME, TRIP TIME, Country Standard Set,
PV1 Capacity, PV2 Capacity, PV Feed-in Limit, Battery SOC Maximum/Minimum, Battery SOC Minimum
Alert
Tab [
] on the main screen and tab [Installer Settings]
option.
[Installer Log In] menu appears on the screen.
Input 'pcs' and tab [space] for more than 2 seconds in [Installer
Log In] menu.
[PCS Settings Information] appears on the screen.
NOTE
y All the values on the [PCS Settings Information] list can
not be edited by user or installer.
Appendix
47
5
Advertisement
Table of Contents
