12
Installation
Choice of location
Mounting Location
2
y This product is designed to be installed indoor use only. Do not
install this product outdoor.
y Install this product on the place where PV cables, smart meter
cables, grid cables and battery cables are easily accessible.
y This product is designed to be installed on the wall only. Do not
install this product on the ground.
y The mounting surface must be able to support the weight of this
product (34 kg).
y Do not install the product on the ceiling.
y Do not install the product widthwise or install on a wall with lean
more than 10 degrees.
y Do not install the product tilting forward.
y Install the product the connection side down.
y Appropriate operating temperature is from 0° C to 40° C.
y Do not install this product in the place exposed to the direct
sunlight.
y Install the product in a clean, cool room.
This product must not be installed or used at altitudes above 2 000 m.
Do not install this product in places where looding frequently occurs.