Document : ESS-01-ED05K000E00-EN-160926 Status : 09/2016 OPERATING MANUAL Energy Storage System Please read this manual carefully before operating your set and retain it for future reference. MODEL ED05K000E00 *MFL69509501* www.lg.com/global/business/ess...
Getting Started Safety Information IMPORTANT : THIS PRODUCT SHOULD NOT BE USED FOR ANY PURPOSE OTHER THAN THE PURPOSE DESCRIBED IN THIS INSTALLATION MANUAL. Indicates a potentially dangerous situation. Death or serious injury may result WARNING if appropriate precautions are not taken. y There is high possibility of electric shock or serious burns due to the high voltages in power conditioning circuits.
Getting Started Indicates a situation where damage or injury could occur. If it is not avoided, CAUTION minor injury and/or damage to property may result. y Ensure that you connect the earth ground wire to prevent possible electric shock. Do not try to ground the product by connecting it to telephone wires, lightning rods or gas pipes.
The electricity generated from a PV array can be stored to the connected battery or sold to energy supply companies. y DC-Coupled ESS LG ESS can achieve higher system efficiency due to simpler power conversion process. y Three-Phase Connection 3-phase connection secures phase balancing.
Table of Contents Table of Contents Getting Started Safety Information ..............2 Product Features .
Getting Started Abbreviations on this manual Abbreviation Designation Explanation Energy Storage System Inverter system that stores energy into a battery and uses it. Power Conditioning A device intended to convert DC electricity generated from PV System system to AC electricity and feed it to household appliances. Photovoltaic Solar panel system that converts solar energy into direct current electricity...
Getting Started Name of each part Front and Rear A Front Cover E Upper bracket connected part B LCD touch panel F Lower bracket connected part (Left) C LED Indications G Lower bracket connected part (Right) D Lower Cover H Lower wall bracket LED indications Power Solar Battery...
Getting Started Lower parts A PV switch (DC Disconnect) E BMS control connector B PV1(+ and -) connectors F Meter/LAN cable gland C PV2 (+ and -) connectors G AC grid cable gland D Battery DC cable gland...
Operating About main screen The main screen displays and indicates current ESS status briefly. When you tab an area indicated above, it displays detailed information. NOTE y The displayed values on the LCD touch panel are not exact values. The values may differ from actual values. y Please turn on the AP again, if there is a problem at connection with AP.
Operating Displays generating status of the connected PV briefly. Tab [ ] to display detailed generating status of the connected PV. The status values are the sum of PV1 and PV2. Brand : PV Manufacturer (Default : LGE-SOLAR) System Capacity : PV capability Generated This Month: Generated PV energy in this month DC Voltage : Current PV voltage DC Power : Current PV power...
Operating Checking the system status On the main screen, you can check the current status of the system. Indicates the amount of power generated on PV Indicates the amount of power consumed in household Indicates the amount of power purchased from grid or sold from PV Charging..
Operating Basic menu operation Tab [ ] on the main screen. Tab a desired option. Tab a desired menu option on the left side. Tab a desired setting option and set the appropriate value. NOTE When this product is turned on for the first time, settings in [Installer settings] menu must be set by authorized service personnel.
Operating Energy Analysis menu On [Energy Analysis] menu, you can check the statistical information of this system. You can review the amount of energy generated, consumed, sold and purchased on this system. The statistical data of the day, week, month and year are supported. PV Graph Analyzes the energy generated and sold from PV within selected period and displays as a graph.
Operating General Settings menu You can adjust general setting values of the LCD touch panel. Display You can adjust brightness of the screen or screen timeout setting on [Display]. [Brightness] Tab [Display] on [General Settings]. Display setting menu is displayed. Tab A or D to adjust the brightness of LCD touch panel.
Operating Language You can select language on [Language]. Tab [Language] on [General Settings]. Display setting menu is displayed. [Language] Select the desired language using A or D . You can select the one between [German] and [English]. Battery You can set winter mode setting on [Battery]. [Winter mode] Tab this switch to select [Enable] or [Disable].
Operating System Information Displays system information of this ESS. You can check information on PCS, battery and network status. Tab S or W to display next or previous information. PCS information Battery and software information Network status information...
LG EnerVu web monitoring system. Preparation y An internet browser installed computer, tablet or mobile with internet access are needed to access LG ESS web monitoring system. y This product must be connected to internet. The [Network] setting menu in the LCD touch panel must be set by the installer.
On the account creation page, select [CONFIRM] to complete creating your account. Select [SIGN IN] to go to the [SIGN IN WITH LG ACCOUNT] page. Input your [User ID] and [Password] and select [SIGN IN]. Available LG account services are displayed on the screen.
Using EnerVu Overview of my EnerVu page When you enter the main page of your EnerVu, you can find and check various information related to your system. Weather Displays the weather of the location the system has been installed. This page provides you Location Displays the location the system has been installed on the map.
Using EnerVu Analysis On this page, you can make a statistical graph of the energy analysis. You can review the amount of energy generated, consumed, sold and purchased on the system. The variety of statistical charts are supported on the page. On the [Event] tab, you can check the issues occurred on the system.
Using EnerVu Making a statistical graph You can make a daily, monthly or an yearly graph of statistical data for energy management on your system. Select the [Day], [Month], [Year] or [Total] option to make a graph of statistical data. 1.
Using EnerVu 4. There are several options at the bottom of a graph, click each option to show or hide the statistical information on the graph. Available options differ depending on the graph. Refer to table described below for more information of graph options.
Using EnerVu Checking system event When you select the [Event] tab, the page shows a list of issues occurred such as system fault, warning. 1. Select the [Event] tab on the left side of the screen. A list of issues such as system faults, warnings appears on the screen.
Note the email address of recipient. y The email address of recipient must be registered as a LG member. If the recipient is still not a LG member, an automatic email requesting to become a member will be sent to the recipient.
If you have technical problems or questions, contact installation company or LGE. 1. Installation Company Address : Tel : 2. LGE Address : LG Electronics Deutschland GmbH Berliner Straße 93 40880 Ratingen Germany Tel. : + 0049 18 06 807 020...
Appendix Specifications General Dimensions (W x H x D) 493 mm x 670 mm x 185 mm Net weight (approx.) 34 kg Operating temperature 0 °C to 40 °C Operating humidity 60 % Max. efficiency (PV to grid) 95.7 % AC input/output Rated grid voltage 3-NPE 400 V / 230 V...
Appendix Battery input / output Battery manufacturer LG Chem Battery model name ED00064CN00.ADG3TUH Battery capacity 6.4 kWh Rated voltage 207.2 V Operating voltage range 168 V to 232.4 V Constant current / constant voltage Standard charging condition 0.3 C (9,45 A) current, charging voltage 232.4 V (at 25 °C)
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to firstname.lastname@example.org.