Table of Contents
Advertisement
When the set torque value has been reached, the tool will
switch off precisely and an audible signal (beep) will sound.
Actuate the slide switch only when the motor is stopped.
Precision shut-off torque
Align the arrow on the tool
case with the required position
number on the wheel.
5.4.1 Manual Adjustment of Shut-Off Torque
1) Remove battery pack
3) Set shut-off torque
Setting lower
shut-off torque
ABG Battery-Powered Nutrunners
2) Use suitable flat head
screwdriver
Setting upper
shut-off torque
Turn carefully,
without any
pressure, to avoid
damage to the
potentiometers!
Using the measures shown in the image, you can shift the
characteristic line in the upper and lower part.
The shut-off torque will be increased (+) or reduced (-)
accordingly. Adjustments of ±5% are possible
4) Reinstall battery pack after adjustment and check the
settings using the SDMS. Repeat work steps until the required
result is achieved. Document the torque progression after
completion.
Every change made takes effect in gear 1 and in
gear 2.
6.
Mechanical Operation
6.1
Safety Instructions for Tightening and Loosening
Always observe local regulations and directives
when starting the tool. Always inspect power tool
to make sure that it can safely function. Never
work with damaged tools or objects.
Beware
freely
garments, long hair, cables, etc. must be kept
outside the danger zone / rotation range.
The ABG Nutrunner must never be operated
without supervision. Immediate stopping must
be possible at all times. Observe safety distances.
8
rotating
accessories.
Loose
Advertisement
Table of Contents
