Related Manuals for AcraDyne AAP1B66400A
Summary of Contents for AcraDyne AAP1B66400A
- Page 1 High-Torque Pneumatic Nutrunners Operations Manual PORTLAND OR 97292-0460 • 800-852-1368 • FAX 800-582-9015 www.aimco-global.com...
-
Page 2: Table Of Contents
Table of Contents Introduction __________________________________________________________________________________________ 3 Safety Information ___________________________________________________________________________________ 3 Specifications ________________________________________________________________________________________ 4 Operation _________________________________________________________________________________________5 - 6 Reaction Bar Safety _______________________________________________________________________________ 7 – 8 Accessories ________________________________________________________________________________________9 -10 AIMCO Limited Warranty ____________________________________________________________________________ 11... -
Page 3: Introduction
Safety Information CAUTION – DO NOT USE THE ACRADYNE® HT NUTRUNNING SYSTEM WITHOUT FULLY READING THIS MANUAL AND HAVING A COMPLETE UNDERSTANDING OF THE CORRECT USAGE OF A HIGH TORQUE DELIVERING TOOL AND ANY ASSOCIATED REACTION BARS/ACCESSORIES. -
Page 4: Specifications
MAINTENANCE: Clean, inspect and lubricate all ring gears, planet gears and bearings every 100,000 cycles. NOTE: All work must be performed by a trained and certified AIMCO/AcraDyne repair technician. Replace all worn parts with original AIMCO/AcraDyne parts. FOR AIR MOTOR: Place three drops of light spindle oil properly through the air inlet daily and at shift change. Always use AIMCO Motor Oil when lubricating the air motor. -
Page 5: Operation
Torque Adjustment Each AcraDyne HT Air tool is delivered with a Pressure versus Torque Output Calibration Graph (See example). Calibration Graph (See example). Using a reliable regulator with gauge in the air supply line, adjust the supply air pressure to correlate with the desired torque output as shown on the specific graph supplied with the tool. - Page 6 Reaction Bar INSTALLING REACTION BAR To maximize the effectiveness of this feature: • Begin with the AcraDyne HT Series Nutrunner disconnected from the air supply. • Make sure the recessed area around the teeth on the Reaction Bar is down toward the Gear Box.
-
Page 7: Reaction Bar Safety
Reaction Bar Safety AcraDyne® HT Nutrunning Systems deliver high amounts of torque to an application in a continuous drive manner. As is the nature with all tool systems that function in this manner, high amounts of torque reaction will occur. AcraDyne® HT systems work with Reaction Bars that engage the tool with a secure spline and when used correctly counteract the natural torque reaction in use by pressing against a part detail or adjacent nut/bolt. - Page 8 Reaction Bar Safety Pinch Point CAUTION IS REQUIRED. FAILURE TO EXERCISE CAUTION AND CORRECT OPERATING TECHNIQUE CAN RESULT IN SERIOUS PERSONAL INJURY, LOSS OF LIMB OR DEATH. The nature of a Reaction Bar in any continuous drive tool is to press against an object to counteract Torque Reaction as the tool is delivering Torque.
-
Page 9: Accessories
HT Pneumatic Tool Accessories... - Page 10 HT Pneumatic Tool Accessories...
-
Page 11: Aimco Limited Warranty
NEW TOOL AND ACCESSORY WARRANTY Any new tool or accessory branded with the AIMCO, Uryu, AcraDyne or Eagle Industries name, and purchased from AIMCO, or through one of its authorized distributors or agents, is warranted to the original buyer against defects in materials and workmanship for a period of one (1) year* from date of delivery. - Page 12 CORPORATE HEADQUARTERS AIMCO CHINA AIMCO SOUTH KOREA 10000 SE Pine Street Room 607, No. 3998 Hongxin Rd B-1213, 167, Songpa-Daero Portland, Oregon 97216 Minhang District, Shanghai Songpa-Gu, Seoul 05800 Phone: (503) 254-6600 China South Korea Toll Free: 1-800-852-1368 Phone: 0086-21-34319246 Phone: 0082-2-2054-8930 Fax: 0086-21-34319245 Cell: 0082-10-9804-8905...