Connecting A Usb Device; Connecting An Ieee 1394A Device - Prestigio Nobile 1520 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
3. Since your computer cannot output sound to a TV, you can connect external speakers to the computer for audio
output.
4. Turn on the power of the TV and switch to the video mode.
5. Turn on the power of the computer and switch the display to TV by changing the settings in Display Properties in
Windows.
CAUTION:
Do not set the display to both LCD and TV. This may cause unstable display on the LCD.
Do not disconnect the TV while the computer is in the Standby or Hibernation mode. If the TV
is not connected when the computer resumes, the LCD might not display properly.
NOTE: Make sure that the VGA driver is installed correctly.

Connecting a USB Device

Your computer has three USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and
mouse.
USB (Universal Serial Bus) is specified to be an industry standard extension to the PC architecture. It supports "Plug-and-
Play" technology so you can install and remove USB devices without turning off the computer. With its multiple
connection capability, up to 127 devices can be connected in a daisy-chain configuration. In addition, you can use a USB
hub that converts a single USB connector into multiple ports where USB devices can be connected.
The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices.
To connect a USB device, simply plug the device cable to one of the USB ports.

Connecting an IEEE 1394a Device

Your computer has a mini IEEE 1394a port for connecting IEEE 1394 devices.
IEEE 1394a is the next-generation serial bus standard, featuring high-speed data transfer, multi-channel communication
link, and "Hot Plug" connectivity. It allows connection of up to 63 devices. The applications include not only computer
peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM
and VCR.
To connect an IEEE 1394a device, prepare an IEEE 1394a cable. Plug the appropriate end of the cable to the computer's
mini IEEE 1394a connector and the other end to the device's corresponding connector.
PRESTIGIO NOBILE 1520
21

Advertisement

Table of Contents
loading

Table of Contents