Expanding Your Computer
You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure
to read the instructions accompanying the device together with the relevant section in this chapter.
Connecting an External Monitor
If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor to
your computer.
Follow this procedure to connect an external monitor:
1. Make sure that the computer is not turned on.
2. Plug the CRT monitor's D-type signal connector to the computer's VGA port.
3. Plug one end of the CRT monitor's power cord into the power socket on the monitor and the other end to an electrical
outlet.
4. To use the CRT monitor, turn on the CRT monitor before turning on the computer.
5. The CRT monitor should respond by default. If not, you can switch the display to the CRT monitor, or to multi-display
by pressing Fn+F5. In Windows, you can also change the display through the settings in Display Properties.
6. You can change display settings through your operating system. See your operating system documentation or online
help for specific information.
CAUTION: Do not disconnect the external display while the computer is in Standby mode or
Hibernation mode. If no external display is connected when the computer resumes, the
computer's LCD might not display properly.
Connecting a TV
For entertainment, conferences, or presentations, you can connect a TV to your computer.
Follow this procedure to connect a TV:
1. Make sure that the computer is not turned on.
2. Prepare a S-video cable. Plug the appropriate end of the S-video cable to the computer's S-video connector and the
other end to the TV's S-video input connector.
20
PRESTIGIO NOBILE 1520