Checking Wearing Mode Configuration; Removing The Wrist Strap - Tunstall The Vibby User And Installation Manual

Checking Wearer Mode configuration
It is possible to check the Wearer Mode the Vibby is configured
to by following these steps while the Vibby is in Storage Mode.
1)
2)
3)
You have now successfully changed the Wearer Mode. To change
over the neck cord or wrist strap, follow the instructions on the
next 4 pages ensuring the Vibby remains in Storage Mode until
completed.
12
Quickly press the button twice.
The red LED will illuminate
and the Vibby will vibrate.
This indicates the Vibby is
configured for a wrist strap.
The green LED will illuminate
and the Vibby will vibrate.
This indicates the Vibby is
configured for a neck cord.

Removing the wrist strap

The Vibby comes pre-packed
with a wrist strap. Follow the
below steps to remove the
wrist strap:
Holding onto the existing
wrist strap and the Vibby
gently pull until the retention
features click out of place.
Repeat this process for the
remaining side of the strap.
After the retention features
have been removed from
both sides of the Vibby; it
will easily come out of the
wrist strap.
13