Automatic Alarm Cancellation; Manual Alarm Cancellation - Tunstall The Vibby User And Installation Manual

Automatic alarm cancellation

When a fall is detected, the user will be alerted with a 20 second
pre-alert with the red LED flashing and vibration.
Accidental alarm calls can be cancelled by following the below
steps.
1)
2)
3)
4)
If during step 3, the user does not remove their hand after the
first burst of vibrations, the Vibby will vibrate three times to
indicate that the alarm has not been cancelled. This is an in-
built safety feature that is designed to ensure the alarm is not
cancelled if a user covers the Vibby during the fall.
6
An active alarm call is taking place:
the LED flashes red and the Vibby
vibrates.
Cover the face of the Vibby with
your hand you will feel a burst of
vibrations.
As soon as the vibrations stop you
should remove your hand from the
Vibby.
The alarm is now cancelled and the
Vibby will stop vibrating and flashing
its LED.

Manual alarm cancellation

After the Vibby help button is pressed, you will have
approximately 10 seconds to press the green cancel button on
the Smart Hub medical alarm.
The Smart Hub will announce "the alarm call has been
cancelled". This in-built delay prevents accidental cancellation of
an alarm.
7