Cleaning; Warnings And Cautions; Spares And Accessories; Low Battery Calls - Tunstall The Vibby User And Installation Manual

Cleaning

If required, the Vibby may be cleaned periodically with a damp
cloth and mild detergent or an alcohol wipe.
Remember that the Vibby will not detect falls while it is not being
worn, therefore the user should put the Vibby back on again as
soon as they've finished cleaning it.

Warnings and cautions

It is important to test the Vibby in all areas of the home, including
the bathroom, basement and garage. Environmental conditions
such as furnishings, building structure, submersion in liquid
etc. may affect the range of the Vibby. A help call will NOT be
initiated if the Vibby is activated while out of range of the
home unit.
In certain situations, the Vibby may not assess an event as a fall.
It is important to remember if the user needs assistance, they
should always press the help button.

Spares and accessories

Wrist strap (black):
Neck cord (black):
Battery o-ring seal*:
Battery:
Battery opening tool:
*A new battery o-ring seal is required for each battery change.
20
D6654001A
D6652001A
D6654020A
CR2477
D6656001A

Low battery calls

The Vibby monitors its internal battery. If a low battery is
detected this will be signalled as an Auto Low Battery (ALB) call
every 23 hours. Once the first ALB call has been raised, the unit
will last up to 4 weeks (dependent upon volume of activations).
Following a low battery signal, the battery should be changed as
soon as possible.

Technical details

Dimensions (W x H x D)
Weight
Battery type
Battery life
Radio frequency
Radio range
Waterproof rating
Operating temp range
34mm x 37mm x 13mm
35g
CR2477 \ LIMnO2
Up to 2 years depending on
usage
915MHz frequency range
50m
IP67 / Up to 1m for 30mins
0°C to 50°C
21