Status Lamp - Nikon KeyMission 360 User Manual

Status Lamp

Color
Green
Red
Status
Live images are being output.
On at the same
The camera is connected to a TV with an
time
HDMI cable.
The camera is capturing a still image.
Flashing at the
The self-timer is counting down.
same time
Pairing is complete.
The camera is on standby for connection with
Flashing at the
a smart device (you can also use the camera
same time
as-is). When you launch SnapBridge 360/170
(once in 5
on a paired smart device, the camera is
seconds)
reconnected.
Flashing at the The camera is on standby for connection with
same time a remote control (you can also use the
(twice in 5 camera as-is). When you turn on a paired
seconds) remote control, the camera is reconnected.
Alternately The camera is in pairing standby mode for a
flashing smart device.
Alternately
The camera is in pairing standby mode for a
flashing
remote control.
quickly
The camera is recording a movie in
Standard movie mode.
On at the same The camera is recording a movie in
time Superlapse movie, Loop recording, or
Time-lapse movie mode (changes from
flashing 3 times to on).
Flashing at the The camera is saving a movie.
same time Pairing failed.
A memory card is not inserted.
Out of memory.
Output of live images is stopped because
the inside of the camera became hot
Quick flashing during output. When the camera has
at the same cooled, output resumes automatically.
time The inside of the camera has become hot.
The camera turns off automatically. Wait
until the camera or battery temperature
has cooled before resuming use.
The firmware version update failed.
Description
Technical Notes
41