Using Snapbridge 360/170; Preparing For Pairing; Camera; Smart Device - Nikon KeyMission 360 User Manual

Using SnapBridge 360/170

Preparing for Pairing

You can do the following when you pair the camera and a smart device
installed with the dedicated app, "SnapBridge 360/170".
Upload captured still images and movies to the smart device
Use the smart device to perform remote photography or play back
images
Change the camera settings

Camera

Turn off the camera (A5). The camera cannot enter pairing standby mode when
the camera is on.
Turn off the airplane mode switch (A1). You cannot pair when it is on.
Use a sufficiently charged battery so that the camera does not turn off during the
procedure.
Insert a memory card with sufficient free space.
Disconnect the HDMI cable or USB cable.

Smart Device

Enable Bluetooth and Wi-Fi on the smart device. If you will use NFC, enable NFC.
Download and install the dedicated app, "SnapBridge 360/170," from the Apple
App Store® for iOS or from Google Play™ for Android™.
- "SnapBridge" cannot be used with this camera.
- You can check the OS versions that SnapBridge
360/170 supports by visiting the download sites
above.
Using SnapBridge 360/170
13