Connectors And Indicators; Din Rail Mounting - Anybus Communicator PROFINET IRT User Manual

Installation
3.2

Connectors and Indicators

A
B
C
D
E
F
3.3

DIN Rail Mounting

Mount on DIN rail
1. Hook the unit onto the upper lip of
the rail and push gently downwards.
2. Push the unit towards the rail until it
snaps into place.
Remove from DIN rail
1. Push the unit gently downwards on the rail.
2. Pull the bottom end of the unit free of the rail and remove it.
®
Anybus Communicator ™ PROFINET
LED indicators
PROFINET IRT network interface
PC connector
Serial subnetwork interface
Power connector
DIN rail mount
The unit must be electrically grounded through the DIN rail for EMC compliance.
®
IRT (2.32) User Manual
B
C
D
E
1
2
Fig. 9 Push down to mount or remove
12 (66)
A
F
SCM-1202-033-EN 1.1