Samsung SF SF-560 User Manual page 60

1
Press Menu until "Fax Feature" appears on the top line of the display.
2
Press the scroll button (
bottom line and press Enter.
3
Enter the number of the remote machine to be polled using the
number keypad.
To enter the number, you can use a one-touch keypad or speed dial
number. For details, see page 2.15.
4
Press Enter to confirm the number on the display. The display asks
you to enter another fax number.
N : The "Another No." prompt does not appear if you have added numbers
OTE
for another broadcasting or delayed fax job. You must wait until the job is
completed.
5
To enter more fax numbers, press 1 to select "Yes" and repeat steps 4
and 5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another fax number.
6
When you finish entering fax numbers, press 2 to select "No" at a
"Another No." prompt.
7
Enter the time using the number keypad.
To select "AM" or "PM" for 12-hour format, press the
or any number button.
If you set a time earlier than the current time, your machine will poll at
that time on the following day.
8
When the remote machine is secured with a 4-digit poll code, enter the
correct code and press Enter.
If not, press Enter to accept "0000" which represents no code, or
enter 0000.
9
Press Enter when the start time displays correctly.
At the specified time. the machine will dial the numbers and receive
documents from the remote machine in the order you entered.
or ) to display "Delay RX Poll" on the
or button
A F 3.5
DVANCED AX
3