This operation guide describes the basic
functions of your GT Series Tenant Station
For a complete operation manual (3.7 MB), scan QR code or use link to download
it from the manufacturer's website:
Power Source
This tenant sub station is powered by the main tenant
station (GT-2C) and will always remain on, even when
the screen is off. Contact the building manager if the
tenant sub station in this residence is not working.
LCD Screen
Microphone
Operation
Buttons
Push the MONITOR
button to see and
hear activity in the
hallway (personal tenant door
station required) or at the
main entrance (if enabled).
Push the CALL
button to talk
between rooms or
to call all stations within the
apartment (two or more
tenant stations required).
GUARD Button
Push the GUARD button to call all
guard and concierge stations
connected to the system (if included).
To view a visitor on a CCTV camera
(if enabled), push the GUARD button while in
communication with the entrance station.
www.aiphone.com/gt-2h_op-man
Door Release
Button
Push the door
release button
to unlock the
entrance
during a call.
OPTION Button
Push the OPTION
button to activate
an external device
(if included).
beep is heard. The conversation then requires
the TALK button to be pushed and held while
talking and released while listening. Whether
the conversation is hands-free or PTT, the talk
indicator light turns on while you speak and will
turn off while your visitor speaks.
QR Code
Place
Holder
Speaker
OFF Button
Push
the OFF
button to
end a call
(this does not turn
off the station).
TALK Button
Push the
TALK button
to answer an
incoming call.
Once answered, conversation
becomes hands-free. For
push-to-talk (PTT) mode,
push the TALK button until a
GT-2H Tenant Sub Station
LCD Screen
Brightness
adjust the
Control
LCD screen
brightness
levels (0~10).
Volume
Control
Use the dial
to adjust the
communication
volume (0~10).
Chime Volume
Control
Use the dial to
adjust the chime
volume (0~10). The
TONE OFF light
blinks slowly when
the chime is muted.
ADJUST Button
Push the ADJUST button
to compensate for low or
bright backlight conditions
when viewing video from
a door station.
ZOOM / WIDE Button
Push the ZOOM / WIDE
button to change the
screen view or to make
a menu selection.
Camera / Cursor
Control Button
Push , , , or
the camera view (zoom-view
only). When making menu
selections, push
change the cursor position.
GT-2H Operation Guide | 1 of 1
Use the
dial to
to change
or
to
1 / 2017
Need help?
Do you have a question about the GT-2H and is the answer not in the manual?
Questions and answers