Promise Technology SUPERTRAK TX8658 Quick Start Manual page 15

Task 7: Installing WebPAM PRO
See Chapter 2 of the SuperTrak User Manual on the Software CD for an
explanation and detailed installation instructions.
Operating System Support
On the Host PC where you install the SuperTrak controller and WebPAM PRO,
Promise Technology recommends:
• Windows Server 2008 SP1 (32 or 64 bit)
• Windows Vista SP1 (32 or 64 bit)
• Windows Server 2003 SP2 (32 or 64 bit)
• Windows XP SP2 (64 bit)
• Windows XP SP3 (32 bit)
• Red Hat Enterprise Linux 5.0, 5.1, 5.2 (32 or 64 bit)
• SuSE Linux Enterprise Server 10 SP2, UP and SNP, (32 or 64 bit)
• SuSE Linux Enterprise Server 10 SP1 (32 or 64 bit)
• Open SuSE Linux Enterprise Server 10.2, 10.3, 11 (32 or 64 bit)
Choose one of these operating systems to take full advantage of all the features
of WebPAM PRO.
Browser Support
Choose the latest version of the following browsers to use with WebPAM PRO:
• Internet Explorer
• Firefox
• Netscape Navigator
If you do not have one of the above browsers on the Host PC, install the browser
first and make it the default browser. Then install WebPAM PRO.
Installing WebPAM PRO onto Windows
This procedure installs WebPAM PRO and the Command Line Interface (CLI)
onto your PC or Server.
If you have WebPAM or an earlier version of WebPAM PRO on
your PC or server, manually uninstall them before you install
WebPAM PRO from the Software CD.
SuperTrak Installation Task List
Caution
15