Promise Technology SUPERTRAK TX8658 Quick Start Manual page 10

SuperTrak TX Quick Start Guide
3. Press the arrow keys to highlight Disk Array Management and press Enter.
The Disk Array Management screen appears.
4. Highlight Create Disk Array and press Enter.
The Create Disk Array screen appears.
Use this screen to select the physical drives for your disk array.
5. Press the arrow keys to highlight a physical drive. Then press the spacebar
to select the physical drive.
An asterisk (*) appears at the left of each selected physical drive.
The first number under ID refers to the enclosure. The second pair of
numbers refer to the individual physical drive.
Highlight Save Configuration and press Enter.
6.
The Disk Array Management screen appears, showing your new disk array
10