A
J: P
PPENDIX
G
ENERAL
Le
vels
Access
Users
Password
Loss of the password
PAGE 90
USER GUIDE DNC 600S
ROTECTING THE ACCESS LEVELS
I
NFORMATION
Depending on the version, the DN
4
-posi
tions physi
cal ke
However the protection levels 0-1-2 and 3 still exist.
For the case where the physical key doesn'
password.
CAUTION
: these passwords will be reset
initialization of the machine param
Mach Par = 1).
T
hus,
in this man
ual w
e always w
e
.g.: "K
ey in posi
tion 3
T
here
exist 4 acc
ess le
vels, 0 to 3
0 = Programming prohibited.
1 = Creation, correction, modification, saving, deleting, transfer of one
(or more) product(s).
2 = Creation, correction, modification, saving, deleting, transfer of the
tools.
3 = Programming, modification and transfer of the machine param
These levels are accessed by pressing the
minimum.
A pop-up is displayed.
Press the
The key position is displaye
screen (after the interactive field).
When passing to a higher, not authorized level, a password modification will
be requested.
When the password has been introduced, you can "navigate" levels inferior
or equal to the authorized one without reintroducing the password.
Passing to level 0 resets password validity.
A number of different users are predefined. A user is not a physical person in
particular, but can be e.g. all the operators having the authorization to work
on the machine.
Each predefined user possesses his own password and a maximum level
which he can reach. See further under Table of users, access and passwords.
Certain users can modify their own password. For the others, the password
can only be changed by a user having a superior access.
In case of loss of the password, a user of a superior level has to reprogram
the password.
C 6
00S
can o
y.
t exis
in the
ete
rs (817 on INIT pa
ill
speak f a (virtual)
o
".
.
or
keys.
d as a num
ber on the upper right part of the
r can not
be equipped with a
t, the acc
ess is made by
default
values at each
ge and Choice Init
key position like
eters.
keys during two seconds
Need help?
Do you have a question about the DNC 600S and is the answer not in the manual?