Bissell POWERFORCE HELIX 2110 SERIES User Manual page 7

Accesories:
Dusting Brush
Your new PowerForce Helix vacuum not
only does a great job on your floors, it also
comes with a complete set of accessory
tools to make your above floor cleaning
jobs easier. Just put your vacuum in the
Maintenance:
**TurboBrush only comes standard with 2110 series.
1
Twist gray collar
counter-clockwise, until
slot appears then
separate faceplate
Carefully remove brush,
replace belt and brush
if needed.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
Specialized Tools
Extension Wand
Maintain the TurboBrush® Tool
2
If paddle wheel gets
dislodged, align the two
clips on each side and
pop into place.
Crevice Tool
upright position, pick the accessory tool
that best fits your needs and attach it
to the end of your hose. You're ready to
clean base boards, curtains, upholstery and
much more.
TurboBrush® Tool
(Model 2110 Only)
3
The faceplate will not
close properly if all
parts are not aligned
correctly.
www.BISSELL.com
7