Download Print this page
Bissell POWERFORCE HELIX 3313 Series Manual

Bissell POWERFORCE HELIX 3313 Series Manual

Advertisement

Quick Links

POWERFORCE® HELIX™
UPRIGHT VACUUM | 3313 SERIES
What's In The Box?
Handle &
2 Screws (taped
Body
to Upper Handle)
Dusting
Crevice
Brush
Tool
Product Overview
1. Upper Handle
2. Tank Release Button
3. Washable Pre-Motor Filter
4. Dirt Tank
5. Dirt Tank Empty Button
6. Washable Post-Motor Filter
7. Hose Clip
8. Power Cord
Meet your new BISSELL product!
Go to support.BISSELL.com for a comprehensive walkthrough
of your new purchase, including videos, tips, support, and more.
Want to get started right away? This guide has all the information
you need to set up your new product. Let's take a look...
Hose
Lower Cord
Extension
Wand
9. Lower Cord Wrap
10. Hose Wand
11. Power Switch Pedal
12. Handle Recline Pedal
Wrap
9
10
1
7
2
8
3
4
5
6
11
12

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWERFORCE HELIX 3313 Series and is the answer not in the manual?

Questions and answers

Nancy L Paulson
January 24, 2025

What size belt does the powerforce helix use?

Katherine Hopson
February 7, 2025

What size belt does it use

KAREN L. ANKER
March 11, 2025

How can I access the post motor filter? Where can I buy the premotor and post motor filters?

1 comments:
Mr. Anderson
May 14, 2025

To access the post-motor filter for the Bissell 3313 Series:

1. Remove the dirt tank by pressing the release button and lifting the tank away from the vacuum.
2. Press the filter cover release button to access the post-motor filter.

This answer is automatically generated

Sandy Burd
April 3, 2025

Can I rinse the bottom filter out and also the container?

1 comments:
Mr. Anderson
April 3, 2025

Yes, the filters and separator in the Bissell PowerForce Helix 3313 Series can be rinsed out. Clean the filters with mild detergent and water, squeeze out excess water, and allow them to dry completely before reinserting. The separator should also be rinsed and dried with a cloth.

This answer is automatically generated

Sandy Burd
April 3, 2025

The bottom filter, can I rinse both the canister and the filter?

1 comments:
Mr. Anderson
April 3, 2025

Yes, you can rinse the bottom (pre-motor) filter with warm water and allow it to dry completely before reinserting. The canister (dirt tank) can also be emptied and cleaned, but the instructions specifically mention rinsing and drying the filters and separator, not the entire canister.

This answer is automatically generated

David Mcelrath
May 11, 2025

How do I remove the black filter for cleaning?

Summary of Contents for Bissell POWERFORCE HELIX 3313 Series

  • Page 1 7. Hose Clip 8. Power Cord Meet your new BISSELL product! Go to support.BISSELL.com for a comprehensive walkthrough of your new purchase, including videos, tips, support, and more. Want to get started right away? This guide has all the information...
  • Page 2 If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. Warranty Limited 2-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information. Assembly...
  • Page 3 Press the tank release button Holding dirt tank over a trash bin, press release button on and pull handle to lift dirt tank back to open tank and dump debris. away from vacuum. Snap bottom back into place when empty. BISSELL.com 3...
  • Page 4 BISSELL proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL® product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear. Visit BISSELLsavespets.com to learn more.