Joining Spliced Channels - Absco J23083BK Instruction Manual

STEP ONE
Position the channels and the CSJ
joiner channel so the centre of the
CSJ is in line with the end of each
channel to be joined together.
ABSCO INDUSTRIES
INSTRUCTION MANUAL

JOINING SPLICED CHANNELS

STEP TWO
Join the first channel to the CSJ by inserting the centre of the CSJ
(on an angle) to the end of the channel where the JOIN>> text is
marked. Push down one side of the CSJ until you hear a 'click'.
J23083BK
Join the second channel to the CSJ
by positioning the <<JOIN end of
the channel at the centre of the CSJ
(on an angle). Push the CSJ into the
channel until you here a 'click'.
Page 9
DRILL 4x 3mm (0.12") (2 PER
A SIDE) HOLES TO SECURE
SECTIONS TOGETHER. (THESE
SCREWS MAY HAVE TO BE
TEMPORARILY REMOVED
AND REPLACED DURING
STEP THREE STEP FOUR
The joined channels should
now look like the picture
above with the CSJ positioned
equally inside of the joined
LATER ASSEMBLY)
channels.
MARCH 17