Site & Preparation - Absco J23083BK Instruction Manual

This is a do-it-yourself product which requires several tools (illustrated on the left) along with basic construction skills and
knowledge. Use this manual as a guide, and be mindful of positioning parts square, centred and level where applicable
throughout the assembly processes illustrated. Prepare your kit by unpacking all components & check using the Packing
Select a level and even surface for assembly, as uneven surfaces result in the misalignment of panels and parts.
This product includes lightweight components with large surface areas - avoid assembling your shed in windy conditions.
Ensure that your shed is anchored securely to a solid foundation immediately after assembly is completed.
Some parts include sharp edges which are likely to be handled during assembly.
Inspect and understand each part prior to assembly, and be mindful of sharp edges when handling them during
assembly. It's advisable to wear gloves, particularly during each of the panel assembly processes.
Some holes on this product are not pre-punched, and will require drilling - use safety glasses for eye protection,
and gently clear the resulting swarf from the sheet metal to avoid marking and discolouration.
Wearing a pair of closed in shoes throughout the assembly process is highly recommended.
The panel assembly processes can be undertaken by one person, however assistance from a second person is recommended for
ABSCO INDUSTRIES
INSTRUCTION MANUAL
J23083BK
SITE & PREPARATION
the wall, door and roof/lid assembly processes.
Page 3
List at the end of this document.
MARCH 17