Absco J23083BK Instruction Manual page 16

INSTRUCTION MANUAL
J23083BK
7) Place the 90A Jamb into position
1) Ensure that 54R Channels are secured to 39D Sheets.
by nesting end notches around the
2) Place the 89R Jambs into position by nesting end
edges of the 89R Jambs
notches around the high edges of 54R Channels.
8) Install FAST001 Screws.
3) Align top & bottom holes with corresponding holes
in 54R Channel and fit FAST001 Screws.
4) Squeeze 89R Jambs
against rib in 39D Sheets to
align 89R Jamb as straight
as possible (check edge
of Jamb and edge of rib).
9) Place short side of 79A Channel
5) Pre-drill holes in 39D Sheet using
in front of short side of 54R Channel.
holes in 89R Jamb as guide.
10) Install FAST001 Screws.
6) Install FAST001 Screws.
ABSCO INDUSTRIES Page 16 MARCH 17