Page 1
We thank you for choosing an Australian Made Shed. For further assistance please visit our detailed instructional video library at Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au...
Do not erect your shed in windy conditions, ensure that the shed is securely anchored to a solid foundation immediately after construction is completed. It is highly recommended to erect the shed with two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 2...
L = 1785mm STEEL SHEET 1610mm X 773mm CHANNEL L = 1530mm STEEL SHEET 1785mm X 711mm CHANNEL L = 783mm STEEL SHEET 1725mm X 773mm CHANNEL L = 1513mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 3...
Page 4
4mm CSK SCREW & PADBOLT NUT SECURE HINGES HASP TO DOOR 3mm POP RIVETS SECURE HINGES TO DOOR ASSEMBLY (ALTERNATIVE FIXING INSTRUCTIONS METHOD) DOOR SELF TAPPING STRAP SCREW L: 165mm (20mm) ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 4...
Page 7
4mm NUT & BOLT SET shed Do not join components together at this location yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 7...
Page 8
Absco Space Saver Shed Model: 15151S DOOR PANEL ASSEMBLY DOOR PANEL ASSEMBLY 20mm FLANGE 15mm FLANGE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 8...
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 14...
Page 15
SIDE WALL PANEL CHANNELS FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL CHANNELS REPLACE PADBOLT HASP 10mm SCREWS WITH 20MM SCREWS CONNECT DOOR MULLION SECTIONS WITH SIX 20mm SCREWS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 15...
Page 16
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE SLAB - DRILL A 10mm HOLE INTO THE WALL SHEET - DRILL A 10mm HOLE INTO THE CONCRETE DYNABOLT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 15151S 15/01/13 PAGE 16...
Page 17
This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation instructions. The warranty does NOT cover Damage caused by storms, wind, rain snow or poor foundations.
Page 18
ABSCO SHEDS and storage units are primarily used for storage of garden equipment such as lawnmowers, wheelbarrows, garden tools etc. Storage...