Table of Contents
Advertisement
We thank you for choosing an Australian made shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
feedback@absco.com.au
ABSCO INDUSTRIES
Absco Premier Garden Shed
Assembly Instructions
Model: 30302GK
ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
WATER RUN OFF IS KEPT
CLEAR FROM YOUR SHED
FRONT: 3.0m
SIDE:
3.0m
HEIGHT: 2.1m
10mm
PAGE 1
Advertisement
Table of Contents
Related Manuals for Absco 30302GK
Summary of Contents for Absco 30302GK
- Page 1 We thank you for choosing an Australian made shed. For further assistance please visit our detailed instructional video library at Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au...
-
Page 2: General Instructions
Do not erect your shed in windy conditions, ensure that the shed is securely anchored to a solid foundation immediately after construction is completed. · It is highly recommended to erect the shed with two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 2... -
Page 3: Component Description
L = 2993mm STEEL SHEET 1546mm X 773mm CHANNEL WITH HINGES L = 1725mm STEEL SHEET 1725mm X 773mm CHANNEL L = 1725mm STEEL SHEET CHANNEL 1725mm X 773mm L = 1518mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 3... - Page 4 SELF DRILLING HEX PADBOLT HEAD TEK SCREWS (NO HASP HOLE REQUIRED) 3mm POP RIVETS SECURE ASSEMBLY HINGES TO DOOR INSTRUCTIONS (ALTERNATIVE FIXING METHOD) HEX TEK SCREW DRIVER BIT 3mm (0.12") DRILL BIT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 4...
- Page 5 L = 1496.5mm (58.9") 60AL 60AR CHANNEL CHANNEL L = 1496.5mm (58.9") L = 1496.5mm (58.9") RIDGE RIDGE 97AL 97AR BEAM BEAM L = 1521mm (59.9") L = 1521mm (59.9") ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 5...
- Page 6 CSJ joined channels. (on an angle). Push the CSJ into the channel until you here a 'click'. CHANNEL HIGH-SIDE LOW-SIDE 20mm (0.79") 15mm (0.59") CHANNEL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 6...
- Page 7 2 X 60AL 1 x 81B 1 X 55AR 1 X 55AL 1 X 55CR 1 X 55CL 1 X 55BR 1 X 55BL 1 X 81BR 1 X 81BL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 7...
- Page 8 STAGE 3: TURN RIDGE CAP OVER AND MEASURE 250mm FROM THE END OF EACH RIDGE CAP. PLACE TEK SCREWS IN 50mm INCREMENTS FROM SAID END. REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 8...
- Page 9 QTY. = 2 PARTS 97AL & 97AR QTY. = 1 PART ZARSP - 450mm (17.7") LONG ZARSP THE TOP SECTIONS OF CAPPING WILL OVERLAP EACH OTHER AT THE JOIN BY 50mm (2.0"). ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 9...
- Page 12 Do not join components together at this location yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 12...
- Page 13 DOOR PANEL ASSEMBLY DOOR PANEL ASSEMBLY ALL VERTICAL DOOR CHANNELS ARE INSTALLED IN THE REVERSE DIRECTION IN COMPARISON TO HORIZONTAL DOOR CHANNELS 20mm FLANGE 15mm FLANGE FOUR HOLE SET FOR PADBOLT CONNECTION ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 13...
-
Page 14: Rear Panel Assembly
SIDE PANEL ASSEMBLY (2 Required) TRIM THE TIP OF EACH SHEET OR BEND OUT OF THE WAY TO ALLOW CHANNELS TO FIT HARD UP TO THE EDGE OF THE SHEET ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 14... - Page 15 Premier Garden Shed - Model: 30302GK ROOF PANEL ASSEMBLY (2 Required) 2 x PRE-PUNCHED HOLES TO THIS END OF EACH SHEET WITH PART NO. 81A FITTED ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 15...
-
Page 16: Front Panel Assembly
Premier Garden Shed - Model: 30302GK FRONT PANEL ASSEMBLY ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 16... -
Page 17: Door Panel Assembly
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 17... - Page 18 SIDE WALL PANEL CHANNELS FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL CHANNELS CHANNEL TYPE 60A THIS END CHANNEL TYPE 81A THIS END ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 18...
- Page 19 PEAK BRACE TO RIDGE POSITION, AND SECURE WITH SCREW AT EACH BEAM AND ROOF ONE SCREW AT EACH CORNER PANEL WITH ONE ONLY AT THIS STAGE SCREW AT EACH END ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 19...
- Page 20 - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, STEEL DYNABOLT AND STEEL ANGLE ANGLE - DRILL A 10mm HOLE INTO THE WALL SHEET SLAB - DRILL A 10mm HOLE INTO THE CONCRETE DYNABOLT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30302GK 27/04/16 PAGE 20...
- Page 21 This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation instructions. The warranty does NOT cover Damage caused by storms, wind, rain snow or poor foundations.
- Page 22 ABSCO SHEDS and storage units are primarily used for storage of garden equipment such as lawnmowers, wheelbarrows, garden tools etc. Storage...