Windows Server 2003 R2 Environment - Hitachi Compute Blade 320 Instruction Manual

Windows Server 2003 R2 Environment

□
Installing the driver
Drivers bundled in Windows Server 2003 cannot be used.
!
Note
If you install the driver and HBAnyware in Windows Server 2003 , be sure to install Service Pack 2 and
the update program (Hotfix). If they are not available, the driver and HBAnyware cannot be installed. The
driver and HBAnyware cannot operate properly.
"Update version (version 5.2.3790.4021) of the memory driver Storport for Windows Server 2003"
Download the update program from the site below according to your Windows in use.
http://support.microsoft.com/kb/932755/en-us
1. Turn on the power of the blade server, boot Windows, and log in as "Administrator".
Install the driver of this adapter at the same time as HBAnyware.
!
Note
During installation, do not start any other application.
When the adapter is added, the standard driver of OS may be applied. Install the driver according to the
above-mentioned procedure. If you reinstall the driver, also follow the above procedure. When you start
the OS or add the adapter, a pop-up window for driver installation may appear. Click [Cancel] and install
the driver according to the following procedure. The pop-up appears twice per adapter.
2. Insert "Driver Kit CD Version 11-04 or later for Compute Blade 2000" or "Driver Kit CD Version 04-02 or later for
Compute Blade 320" CD-ROM into the CD/DVD drive.
3. Activate the "APInstall.exe" corresponding to the OS.
ＯＳ
Windows Server 2003 (32bit)
Windows Server 2003 x64 edition
4. The driver and the utility are installed automatically. Wait until "AutoPilot Installer" on the task bar disappears.
• • •
It will take a few minutes until completion of installation.
Tip
5. Installation has finished when "AutoPilot Installer" on the task bar disappears.
6. Restart OS.
5-2
APInstall.exe in Driver Kit CD
[Driver Kit CD for Compute Blade 2000]
\X55x1\WIN2003R2\Driver\FibreChannel\Emulex_01\x86\APInstall.exe
[Driver Kit CD for Compute Blade 320]
\X51x5\Win2003R2\Drivers\FibreChannel\Emulex_01\x86\APInstall.exe
[Driver Kit CD for Compute Blade 2000]
\X55x1\WIN2003R2\Driver\FibreChannel\Emulex_01\x64\APInstall.exe
[Driver Kit CD for Compute Blade 320]
\X51x5\Win2003R2\Drivers\FibreChannel\Emulex_01\x64\APInstall.exe
Installing the Driver and Utility