□
Changing driver parameters
1. Select the host or adapter port icon in the Discovery Tree and select the [Driver Parameters] tab from the Property tab.
2. Select a parameter to be changed from the [Adapter Parameter] list.
3. The selected parameter name and the current parameter value are displayed in the "Modify Adapter Parameter"area.
4. Enter a parameter value in the [Value] field or select a value from the pulldown list.
5. Click [Apply] to reboot the system.
1
When you select the host icon in the Discovery Tree and change driver parameters, the change applies to
• • •
Tip
the driver parameters of all ports of the adapters under the selected host. If driver parameters are set per
port, select the adapter port icon in the Discovery Tree to change the driver parameters of the port.
Reboot in procedure 5 is not indispensable. Refer to "Activation Requirements" when you have selected
parameter in procedure 2
6-8
2
4
5
Utility