Table of Contents
Advertisement
Video Off After
This determines the manner in which the monitor is blanked.
The settings are: Suspend, Doze, Standby, and NA
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part
of the time. You may select the percent of time that the clock runs.
VGA Active Monitor
When enabled, any video activity restarts the global timer for
standby mode.
Soft-Off by PWR-BTTN
When enabled, turning the system off with the on/off button place
the system in a very low power usage state, with only enough
circuitry receiving power to detect power button activity.
Power On by Ring
During disabled, the system will ignore any incoming call from the
modem. During enabled, the system will boot up if there is an
incoming call from the modem.
Wake Up on LAN
To use this function, you need a LAN add-on card which support
power on functions. It should also support the wake-up on LAN
jumper (JWOL1).
Enabled
Disabled
62
SBC-676 User Manual
Wake up on LAN supported
Wake up on LAN not supported
Advertisement
Table of Contents
