Unpack The Cisco Ncs 540 Router - Cisco NCS 540 Hardware Installation Manual

Prepare for Installation
To bolt the rack to the floor, a floor bolt kit (also called an anchor embedment kit) is required. For information on bolting
the rack to the floor, consult a company that specializes in floor mounting kits (such as Hilti; see
Make sure that floor mounting bolts are accessible, especially if an annual retorquing of bolts is required.

Unpack the Cisco NCS 540 Router

Before you begin
Ensure that there is sufficient room around the chassis pallet for unpacking.
Step 1 Remove the accessory tray and the packing material.
Step 2
Carefully set the packing material aside.
Tip Be sure to save the packaging in case you need to return any of the components products.
Note These images are for only representation purposes. The chassis' actual appearance and size would vary.

Unpack the Cisco NCS 540 Router

Cisco NCS 540 Router Hardware Installation Guide
Hilti.com for details).
19