Monoprice SB-100 User Manual page 6

IR Remote Control
1. POWER: Press the button to turn the
soundbar on or to put it into standby
mode.
2. PAIR: Momentarily press the button to
connect or disconnect the paired
device. Press and hold the button for
about 2 seconds to put the soundbar in
Bluetooth® pairing mode.
3. LUM: Press the button to turn the
indicator on or off. This does not
function when the soundbar is in
standby mode.
4. LOOP: Loop playback. This functions
only in USB mode.
5. VOL+: Press the button to increase the
volume level.
6. PREV: Press the button to skip back to the previous track. This functions only in
Bluetooth® and USB modes.
7. VOL-: Press the button to decrease the volume level.
8. -10: Skips back 10 tracks. This functions only in USB mode.
9. TREBLE-: Press the button decrease the treble response.
10. BASS-: Press the button to decrease the bass response.
11. MUSIC: Press the button to select the Music EQ effect.
12. NEWS: Press the button select the News EQ effect.
13. MUTE: Press the button turn audio muting on or off.
14. INPUT: Press the button to cycle through the inputs. The cycle order is AUX (3.5mm
analog), USB, BT (Bluetooth®), OPT (digital optical), and COA (digital coaxial).
6