Specifications - Samson Power Amplifier Servo 201a Owner's Manual

Specifications

Rated Output Power, per channel (@ 1 kHz)
Stereo mode
4 ohm, <0.05% THD+N
8 ohm, <0.05% THD+N
Bridge mode
8 ohm, <0.05% THD+N
Typical Distortion, per channel
THD+N (80 kHz LPF @ 1 kHz, rated output power)
IMD (SMPTE 4:1, 60 Hz & 7 kHz @ rated output power)
Signal To Noise Ratio
(22 Hz - 22 kHz bandwidth @ dB below rated output power)
Frequency Response
Input Sensitivity
Crosstalk (adjacent channels)
Output DC Offset Voltage
Headphone Output Level
Dimensions
Weight
+4 dBu on the 1/4" inputs to achieve rated power.
(Level control set to maximum)
± 50 mV, DC Servo Controlled
500 mW (into 100 Ω @ 1% THD+N)
17.5 in (w) x 11.5 (d) x 1.75 (h)
444 mm (w) x 292 (d) x 44 (h)
Specifications are subject to change without notice.
46 46
100 W
65W
200 W
.01%
.03%
105 dB
10 Hz - 20 kHz +0, -0.5 dB
3 Hz - 65 kHz, +0, -3.0 dB
-10dBv on the RCA inputs,
-75 dB, 1 kHz
14.5 lbs • 6.58 kg