Table of Contents
Advertisement
Specifications
1. Rated Output Power, per channel (1 kHz, THD 0.1%, Both Ch Drive)
Stereo / Parallel modes
per channel (into 4 ohms)
per channel (into 8 ohms)
Bridged mode
per channel (into 8 ohms)
2. Frequency Response (0 dB, +0, -.5 dB)
3. Total Harmonic Distortion
(1/2 power @ 20 Hz - 20 kHz, Both Ch Drive into 4 ohms)
4. Dynamic Range
5. Channel Separation (4 ohm, 125 W, 1 kHz)
6. Residual Noise (0 dB ref. = .775 VAC rms, 22 Hz - 22 kHz)
(Att. Min.)
(Att. Max.)
7. Voltage Gain (4 ohm, 1 kHz)
8. DC Offset Voltage
9. Damping Factor
10. Indicators
Clipping LED
Signal LED Right
Signal LED Left
11. Dimensions
12
10 Hz - 20 kHz
105 dB
-68 dBu
-74 dBu
33.5 dB
0 ± 100 mV
More than 200
1 kHz THD 0.1%
-20 dB ± 2 dB
-40 dB ± 2 dB
19 in (w) x 9.75 (d) x 5.25 (h)
482 mm (w) x 247 (d) x 133 (h)
250 W
150 W
500 W
0.04%
80 dB
Advertisement
Table of Contents
