Rear Panel Layout - Samson C.valve C Class Owner's Manual

Rear Panel Layout

A AC INLET – Connect the included AC1800 power
supply here.
B 24 BIT 48 / 96 (DIGITAL OUT)- 24-bit S/PDIF
Digital Output on an RCA connector.
C DIGITAL LINK IN- 1/4-inch input jack for con-
necting the balanced line output of a second C
valve so that the two units work as a stereo unit
transmitting the left and right signals from a sin-
gle S/PDIF digital output.
D BALANCED OUTPUT – 1/4-inch TRS
(TIP/RING/SLEEVE) connector for balanced, line
level output.
E RETURN (INSERT) – 1/4-inch phone jack for car-
rying the return signal of the external processing
loop.
F SEND (INSERT) - 1/4-inch phone jack for carrying
the send signal for the external processing loop.
G INSTRUMENT IN - 1/4-inch phone input jack for
connecting signals from instruments or line level
devices.
H MIC INPUT – 3-Pin XLR input connector for con-
necting microphone level signals.
5
C valve Layout